# HKU's PULSAR II drone uses a single propeller and spins to see in every direction

> **TL;DR:** HKU is testing PULSAR II, a drone with one motor and a two-blade propeller whose body spins continuously in flight A single vertically mounted LiDAR sensor sees all around the airframe, including above and below, and builds a 3D map without GPS It avoids obstacles at over 6 meters per second, weighs about 1.12 kg, and has a measured hover time of 15 minutes 50 seconds It is still a research prototype, not yet used for filming or photography, and it struggles in environments with few reference points for LiDAR

- Original: https://migovi.com/en/hku-pulsar-ii-1-canh-quat-drone/
- Author: [phuclhn](https://migovi.com/en/author/phuclhn/)
- Published: 2026-11-19T12:49:51+07:00
- Categories: News, Technology
- Source: [Digital Trends](https://www.digitaltrends.com/home-theater/scientists-built-a-drone-that-spins-like-a-top-to-see-in-every-direction-and-its-pretty-genius/)

---

PULSAR II turns spin, normally a problem to be solved, into an advantage. A single LiDAR sensor is enough for the drone to dodge obstacles in a forest without GPS.

## One propeller instead of four

When most of us think of drones, we picture quadcopters, since it takes that many motors to keep an aircraft stable and hovering. Researchers at the University of Hong Kong (HKU) took a different route with PULSAR II, an experimental autonomous drone with just one propeller. The whole body spins in flight, yet the drone can still see obstacles in nearly every direction. Despite the unusual design, HKU says the drone can thread through dense forest, avoid obstacles, and survive some collisions without losing control, by turning a thorny engineering problem into a useful feature.

![The University of Hong Kong's experimental PULSAR II drone with its single-propeller design](https://migovi.com/wp-content/uploads/2026/11/hku-pulsar-ii-1-canh-quat-drone-1.jpg)

*The PULSAR II drone developed by the HKU research team*

Instead of using four motors to balance and steer like a conventional quadcopter, PULSAR II has one motor driving a two-blade propeller. A custom mechanism varies the motor's speed within each rotation, changing the angle of attack of the two blades to control the drone's movement.

## Vision from spinning

Interestingly, the team did not try to stop the body from spinning. They used that motion to widen the drone's field of view. The LiDAR sensor is mounted vertically, so as the body rotates it sweeps the entire space around it, including above and below, for 360° coverage without extra sensors or a dedicated rotating mechanism. From that data, the system builds a detailed 3D map of its surroundings and identifies obstacles, even while hovering in place.

## Flight test results

The team put PULSAR II through a fairly demanding set of tests, including high-speed figure-eight flights, aerial flips, and autonomous navigation through both dense forest and an underground parking garage. The drone avoided obstacles at over 6 meters per second (about 13 mph) without relying on GPS, external motion-capture equipment, or a ground computer. In other words, it used only what it carried on board.

![The HKU PULSAR II drone during a test flight](https://migovi.com/wp-content/uploads/2026/11/hku-pulsar-ii-1-canh-quat-drone-2.jpg)

*The PULSAR II prototype during testing*

PULSAR II's collision tolerance is also notable. A lightweight carbon fiber frame protects fragile components, while an advanced control system lets the drone compensate for unexpected outside impacts. In testing, the team dropped a soft ball onto the hovering drone and deliberately flew it into obstacles. In both cases it maintained controlled flight.

## Applications and limits

Gathering spatial information this way opens up uses in places where ordinary drones struggle, such as caves, tunnels, disaster zones, and other complex environments. The researchers say the technology could eventually help with search and rescue, underground infrastructure inspection, disaster response, and mapping where GPS is weak or unavailable. For aerial filmmakers and photographers, similar environmental awareness could let a drone fly itself through tight spaces for bolder shots. For now, though, PULSAR II has only demonstrated 3D sensing, not filming or photography in the conventional sense.

The prototype weighs about 1.12 kg, and its measured hover time is 15 minutes 50 seconds. It remains a research prototype, and the team is still improving its navigation in environments with few reference points for LiDAR, so don't expect top-like spinning drones on store shelves anytime soon.

**MIGOVI VIEWPOINT**

The clever part of PULSAR II is its inverted thinking. Rather than suppressing the spin and adding extra sensors to compensate, the HKU team uses that motion as the scanning mechanism, so a single LiDAR provides a view all around the airframe. The approach suggests drones could depend less on GPS when flying where signals are poor, something the forest and underground garage tests partly demonstrated. Still, the drone has only measured 3D space, not filmed or photographed anything, its hover time is under 16 minutes, and it remains a prototype. So if you are waiting for an obstacle-avoiding drone to shoot difficult scenes, treat this as a direction worth watching rather than something you can buy anytime soon.

Source: [Digital Trends](https://www.digitaltrends.com/home-theater/scientists-built-a-drone-that-spins-like-a-top-to-see-in-every-direction-and-its-pretty-genius/)
